Having a dishwasher in the kitchen can be a huge timesaver for those who use their kitchen often for family or get-togethers.
While the exact cause of the E5 error on a dishwasher will vary depending on the brand you have, the most common reason for the error has to do with the water supply or draining mechanism. Fixing this error, in most cases requires you to either replace or repair the faulty component.
Knowing how to fix your dishwasher once it has displayed the E5 error code will depend on the brand of your specific unit. Keep reading to learn more about error code E5 on your dishwasher.
What to Do if Your Dishwasher Displays Error Code E5
When it comes to dishwasher error codes, nothing can be more frustrating than trying to run a cycle and the unit displays an error. If your unit is showing the E5 error, depending on what brand of dishwasher you have, you may be able to make repairs yourself.
In many cases, the E5 error code means something is wrong with the drain or water supply of your dishwasher. This means that you should be able to either do the repairs, replace the faulty part, or call in a professional for help.
Read on below to learn more about the E5 error code in your favorite dishwasher.
What Error Code E5 Means on a Samsung Dishwasher
Most modern dishwashers are equipped with smart systems that can tell you what type of problem you may be experiencing with your unit. The Samsung brand of dishwashers is no different in the way it can indicate specific problems.
The E5 error on a Samsung dishwasher typically indicates that there is something wrong with the draining mechanism. This typically happens when the cycle is complete and begins to drain, but cannot perform the function.
For a Samsung dishwasher, there are several reasons for the E5 error that directly involve the draining process. The issues have to do with either the internal parts malfunctioning or a clog within the drain.
Here are some of the most common reasons and fixes when the E5 error occurs in a Samsung dishwasher:
- The filter is clogged. When food is not discarded before dishes are put in the dishwasher, the filter becomes clogged with the debris. To fix this issue, you can simply remove the food from the filter area.
- The drain hose is blocked. Sometimes when you get the E5 error on your Samsung dishwasher, it is an indication that something is wrong with the hose. This could be that it is either clogged, bent, or in some cases, frozen. To fix this, you can remove the hose from the dishwasher and run water through it to see if it is indeed clogged, then replace it if it is okay. If not, you may need to replace the hose.
- Broken or malfunctioning drain pump. A more serious problem would be if the drain pump is broken or faulty. This is typically indicated with the E5 error code and certain sounds coming from the pump. If your drain pump is broken or malfunctioning, you can check for a clog, but if this does not work, you may have to replace the pump.
- Pressure switch malfunction. This part is what controls the pressure of the water in the dishwasher. The float for the mechanism typically moves up and down to allow water to flow in and out of the machine. However, if it gets stuck, you can get the E5 error. The fix for this is to clean the float, or if this does not work, replace it altogether.
While this is not an exhaustive list of the problems an E5 error code can indicate, they are the most common. If these issues and fixes do not repair your dishwasher, it may be time to call out a professional.
What Error Code E5 Means on a Bosch Dishwasher
When it comes to well-known brands the kitchen, Bosch is one of the top manufacturers. This is not any different with their dishwashers throughout the many models they have.
The Bosch dishwasher works great and seamlessly cleans your dishes the majority of the time. This is why when it displays an error code, it can become extremely frustrating especially if you are trying to get dishes cleaned.
The E5 error on the Bosch dishwasher indicates that the unit is filling up with water too quickly. This typically happens when there is a malfunction in the unit’s float switch.
The job of the float switch is to float with the water as it fills to signal when the volume is getting to a level that is near full. When the switch gets to a certain point, then the dishwasher knows that it can stop filling with water.
Sometimes the float switch is faulty which results in its inability to signal that the water has reached capacity. As a result, the water is overfilled and the dishwasher displays the E5 error code to let you know that there is a problem.
To fix this problem, three possible solutions may work to get the float switch up and running again. Read below to learn more about the solutions you can try.
- Turn the unit off and back on to reset the switch and the cycle
- Use a multimeter to run a diagnostic on the switch
- Replace the switch
In most cases, the error code E5 on the Bosch dishwasher can be repaired without much of an expense on your part. The worst-case scenario is that you will have to replace the switch, which is still much better than replacing something more expensive.
What Error Code E5 Means on a Siemens Dishwasher
Siemens is a respected appliance manufacturer that has been around for many years and has a line of dishwashers that is comparable with other brands. Like other brands, Siemens dishwashers are built with smart technology that allows you to know when there is a problem.
If you have a Siemens dishwasher and are not quite sure what the error code means, you can always go to the manufacturer’s website to find out. The various error codes are listed with a description of how to fix them.
The Siemens dishwasher error code E5 usually indicates that a part of the electronics is malfunctioning. This typically occurs either when the dishwasher was stopped in the middle of a cycle or there is a technical system error.
Since this error on a Siemens dishwasher has more to do with the electronic parts of the dishwasher, it is important to understand that fixing it may not be easy as replacing a part. In many cases, your only solution is to call a professional who specializes in Siemens appliances.
To take a better look at the causes for the E5 error for a Siemens dishwasher, read on below:
- When the dishwasher is stopped in the middle of a cycle, this can cause the internal electronic parts to malfunction. If done excessively, it can damage the parts beyond repair.
- Other times, there can be a technical error in the system itself caused by some unknown reason. The reason typically is a glitch in the system that was there from when it was manufactured, or caused by some wear and tear.
For the Siemens dishwasher error code E5, there are only three fixes that have any merit in getting your dishwasher on the road to recovery. These solutions are not, however, guaranteed to fix the problem entirely.
- Turn off the dishwasher and restart it. Make sure you wait a few minutes after turning it off before restarting the machine.
- Shut off the water supply, and power supply, and restart. Doing this can completely reset the dishwasher and correct the error code.
- Call a professional service person to evaluate the dishwasher for possible repair. Keep in mind that you should have your warranty information handy to ensure that anything repaired is covered.
Having a working dishwasher can be a great asset to any kitchen, however, seeing these errors that pop up from time to time can be frustrating. Doing your research before attempting to repair it can save you even more frustration, time, and money.
What Error Code E5 Means on a Fisher and Paykel Dishwasher
The Fisher and Paykel Dishwasher manufacturer has created a more modern version of the units that are made to fit your style and needs. These are dishwashers that can be customized to fit your kitchen and the design concept you have created.
While modern and said to run more quietly than other dishwasher brands, they are not unaccustomed to having errors that are similar to the others. This is because it is an electronic appliance that is prone to wear and tear and other malfunctions.
The E5 error code on a Fisher and Paykel Dishwasher can indicate that something is wrong with the water supply or drain of the unit. The actual cause can vary from a crimped water hose to simply not having enough water pressure.
Taking the time to research the issues behind your Fisher and Paykel dishwasher error codes can help you to determine how to get it up and running again. Here are some of the reasons for error code E5 on this brand of dishwasher.
- Drain hose attached lower than recommended
- The hose to the water supply is bent
- The water source is not turned on
- Low water pressure
Fixing the E5 error on the Fisher and Paykel dishwasher depends entirely on the exact cause of the error. While most of these causes are simple, if they do not work you may need to call in a professional.
Check out this list of possible solutions to the causes listed above:
- Connect the hose according to the manufacturer’s recommendations
- Straighten the water supply hose
- Connect the water supply line and ensure it is turned on
- Check water pressure
Whatever the cause of the problem, you should take each step one at a time and work through it to solve the problem. If you have problems with any of these solutions, you may need to either contact the manufacturer or call a professional for help.